Tuesday, January 25, 2011

The Great Debate: Two Stroke vs. Four



The battle for supremacy between two stroke and four stroke quads is likely to rage on forever, except for outside factors that may end this age old debate; it is very likely that upcoming legislation could end production of two stroke engines, making it impossible to get a new two stroke quad.  So if you’ve ever considered getting a two stroke quad, the clock is ticking.

Mechanically the difference between a two stroke and four stroke lies in how often the spark plugs fire.  In a two stroke, it fires once with every revolution of the cam, while a four stroke only fires the plugs every other revolution of the cam.  With everything being equal, a two stroke will have twice as many combustions as a four stroke, which causes it to produce much more energy with the same size engine.  While this may make a two stroke sound like an obvious choice, there are several drawbacks to the design and performance characteristics of two stroke ATV engines.

The extra energy and heat produced by a two stroke requires oil to be added to the gas to keep the engine properly lubricated.  Because oil is put in the combustion chamber, two stroke engines smoke a lot, which is the reason for the imminent ban on them.  One side effect of the impressive power that two stroke engines produce is that the top end of the engine must be rebuilt somewhat frequently, depending on how hard the engine is pushed.  Although the rebuild is not terribly expensive, it must be done periodically to avoid rebuilding the entire engine.

For many riders the constant maintenance is worth the performance they get out of their two stroke engine, but the accessibility of this power may be prohibitive for some riders, riding styles, and terrain.  In order to tap into the power of a two stroke engine, you have to keep the throttle close to wide open to stay in the power band.  Although some models are better than others, some stock two strokes lack real power on the low or midrange.  In the hands of an experienced rider, a two stroke is an amazing machine, but in certain scenarios, you can lose all your power by making a necessary up shift or slowing down without a hard down shift.  However, their explosive power makes two strokes the engine of choice for many racers, especially in racing disciplines that require frequent jumps and quick acceleration out of turns, such as Motocross.

As far as typically maintenance, most four stroke quads require relatively little attention.  Spark plugs and oil changes are always necessary, but you do not need to rebuild the engine on a regular basis.  However, many riders complain of the high cost of rebuilding four stroke engines when necessary, but a four stroke engine should hold up longer than a two stroke if it is rode properly.  If you keep a four stroke high in the rpm range all the time, you are asking for trouble.  Although four strokes do not possess the characteristic break-away acceleration of a two stroke engine, they have access to power through a larger rpm range, which eliminates the need to have the throttle wide open all the time.  Access to power in the low and midrange allows for a much more leisurely riding experience, or the ability to dive into deep mud and come out the other side.  Because a four stroke has power on the low end, it has a much easier time freeing itself from deep mud, while a two stroke is usually doomed if it comes to a stop in mud.  Four strokes, in many cases, have a higher top speed than two strokes, but will take much longer to get to their top speed.  Four strokes have improved a lot over the years, with some many dominant racing quads being propelled by four stroke engines.  However, the Honda 250R, a classic two-stroke quad, is still taking podium spots over ten years after it began production.

For the most part, two stroke engines are better suited for light sport quads and four strokes, which produce most of their power on the low end, are more suited for heavier quads made for mud, rocks, and work applications.  The debate between two stroke and four stroke engines is not likely to end soon, but production of two stroke engines may.  If you prefer high speed, airborne, adrenaline heavy riding and you don’t mind spending some time turning a wrench, you may want to get your hand on a two stroke quad while you still can.

Tuesday, January 18, 2011

Tips for Taking Jumps and Sharp Turns on Your ATV


You may notice that some ATV riders can make certain obstacles and jumps look like child’s play while others make them look dangerous and impassable. Although superior equipment may be partially responsible, experience and familiarity with your quad is what separates the men from the boys. Riding time is the best way to get better, but there are a few techniques, like making you quad pivot around a corner or taking a jump, that can make riding a lot more fun.

If you want to take a corner quickly without losing much speed, depending on your ATV’s setup and capabilities, you may be able to conquer the turn by making your quad pivot around it. Although this technique works best with light, powerful sport quads, it can be used with utility ATV’s as well. Enter the corner wide and fast instead of slowing down or coasting through. When you get to a point in the corner that you hit a spot where you can turn your quad in the direction you want to go, turn your wheels in that direction, hit the front brake hard, and open the throttle. When done properly, this will momentarily cause your rear tires to lose traction and spin your back end around. When you have turned your quad far enough, simply release the brake and keep on the gas. You may fishtail as you finish this maneuver, but steering into the skid will keep you going where you want to go. The result is your quad turning quickly around an obstacle without losing much speed. Making your back wheels lose traction and spin you sideways is the key to this maneuver, so you may get better results if you lean forward and take some weight off the back wheels. This technique is easier accomplished on quads with stiff suspension, low center of gravity, and lots of power on demand. The lack of these characteristics will make this maneuver more dangerous and difficult to do properly, but it can be done if your front brakes can slow you down and you can get your back wheels to break loose.

The key to doing jumps on an ATV is technique and respect for your ride. When done properly, most jumps are relatively safe, but if you bite off more than you can chew, you will get hurt. With this said, easy does it when it comes to learning to get your wheels off the ground. No two jumps are exactly the same, but there is a simple technique for getting air without kissing the handlebars when you land. The length and steepness of the jump will play a large role in how fast you want to be going when you hit a jump, but be conservative on the first couple passes and that will tell you what kind of jump you’re dealing with. Sometimes a jump will have a lip on it that will do unexpected things to your quad, so be prepared. On your first pass, you will want to approach the end of your ramp(whatever it may be) with enough speed that you feel you would get a little bit of lift if you just held the throttle steady all the way through. However, just before you reach the end of the ramp, let off the gas momentarily, but then quickly give it as much gas as possible. This accomplishes two things: first, the burst of power right before you leave the ground launches you into the air; second, it causes your front end to shoot up into the air, much like doing a wheelie. By entering a jump with this posture, your back tires should hit the ground first, ensuring that you and your quad don’t do a swan dive into the ground. When you are airborne, let off of the throttle so that your quad doesn’t over rev while to wheels can spin freely. After your first successful pass, you will know a lot about that particular ramp and what your ATV is likely to do when you jump it. Using this information, you can get an idea of the best speed to hit the ramp at and how much throttle to give it before you leave the ground. For many ramps, especially those that are short and have a sharp angle (like the edges of dried out ponds), first gear may be plenty of speed and power, and if the ramp is too steep, trying your approach in second gear could be painful.

Anytime you ride an ATV you should exercise caution, especially when riding in a new area or trying new techniques. Modern ATVs are extremely powerful and can get out of control quickly if you do not respect their power. When trying any new techniques, take it easy and master it at low speeds. Although something may look simple, every quad handles differently and will react to obstacles and maneuvers differently. Trying to do things that are beyond your skills or your ATV’s handling capabilities can be disastrous and keep you from riding again for a very long time.

Development of ATVs 


ATVs (all-terrain vehicles) were first developed during the 1950s. The earliest models had six wheels instead of the four that riders are now familiar with. Honda was the first company to make the 3-wheel ATV in 1970. These were famously displayed in the James Bond film, 'Diamonds Are Forever.' Originally called the US90, the ATV was purely for fun, made with very large balloon tires instead of the mechanical suspension and smaller tires eventually introduced in the early 1980s.  
One of the most important versions of the ATV was the 1982 Honda ATC200E Big Red. It was a landmark model in that it featured suspension and racks. This made it the first utility three-wheeled ATV available on the market. It was popular due to its ability to go anywhere on any type of terrain. The fact that it could go over types of terrain that most other vehicles could not eventually made it very popular with hunters in both the US and Canadian. It was also very appealing to those who were looking for nothing more than an exciting ride on the trails.  
Soon Honda broke new ground by developing sport models. Honda seemed to have a virtual monopoly on the market, due to its patents on design and engine placement. The 1981 ATC250R was important because it was the first high-performance three-wheeler, featuring full suspension, a 248-cubic-centimetre two-stroke motor, a five-speed transmission with a manual clutch and a front disc brake. For those who enjoyed the sporting trail, the 1983 ATC200X was another in a series of landmark machines. It was developed with an easy-to-handle 192-cubic-centimetre four-stroke. This simple design was seemingly perfect for new participants in the sport. 
Honda soon found itself competing with Suzuki. Suzuki led the industry in the development of 4-wheeled ATVs. It sold the first 4-wheeled ATV, the 1983 QuadRunner LT125, used primarily as a recreational machine for those who were just beginning to ride ATVs. In 1985, Suzuki stepped up their game when they introduced the first high-performance 4-wheel ATV, the Suzuki LT250R QuadRacer. This ATV was in production from 1985-1992, during which time it underwent three major engineering makeovers. This vehicle became the ATV known as designed primarily for racing by highly skilled riders.  
Honda then responded a year later with the FourTrax TRX250R. This ATV has never been replicated.
Kawasaki joined the battle to develop better ATVs when they introduced their Tecate-4 250. In 1987, Yamaha introduced a different type of high-performance machine - the Banshee 350. The Banshee 350 featured a twin-cylinder two-stroke motor from the RD350LC street motorcycle. This ATV was heavier and more difficult to ride in the dirt than the 250s .It soon became a favorite with riders who preferred the sand dunes. The Banshee is still a hugely popular machine, but 2006 was the last year it was available in the U.S. Riders will be able to pick up a 2007 model in Canada, however. 
ATVs were first introduced to the buying public in the 1970s. They immediately caught on with those who were interested in doing something different outdoors. Original versions featured much larger tires and were offered in both 3-wheeled and 4-wheeled models. Soon, though, the 3-wheeled models of the ATV were prohibited, as they gained a reputation for being too dangerous. ATVs have since undergone a number of cosmetic and mechanical changes. Companies such as Honda, Suzuki, and Yamaha have developed a number of models that serve ATV riders of all tastes and interests.

Saturday, January 15, 2011

Buying a Used ATV


Not all of us can afford a brand new 2007 ATV with all the bells and whistles. As with cars or motorcycles or any large vehicle for recreation or pleasure, we sometimes have to start out with buying second hand. Of course there’s nothing wrong with purchasing a used car, bike or ATV. If you are going to buy used, you have to know what to look for, especially with a vehicle such as an ATV where you know that there is a chance the previous owner might have given the ATV some serious abuse on the trails. Before you begin to cruise the classifieds you have a couple of decisions to make. Who is the ATV for? An ATV for an adult is made differently than one made for a child. Do you want the ATV for purely recreational purposes? Do you want to race or just enjoy some leisurely off-roading with your family? Do you want to use the ATV as a utility vehicle?

The best place to start if you have never purchased an ATV before would be at a local dealership. You may not be able to afford one off the showroom floor, but you can still go look and pick the dealer’s brain for information. At the dealership you can ‘test’ the different classes of ATVs. Sit on a few to see how they fit, each ATV will be different and you might find that some are more comfortable than others. Even though you are trying newer models, there really won’t be too much of a difference between them and the older versions.

After getting all the information you can from the dealership, you will have some idea of what make and model you will be looking for in a used ATV. While you’re at the dealership also check to see if they have a bulletin board for other ATV resources. Sometimes if you contact a club or other organization they may be able to put you in touch with people who have ATV’s to sell. Classified ads and specialized classified magazines like you see for cars or motorcycles will also be a valuable resource. And of course the number one source for finding used vehicles is the internet. Places like eBay will no doubt have a lot to offer, the only problem with that is, unless the seller is in your area, you have no way to view the ATV up close.

When you find the ATV you want to purchase, definitely go to check it out personally. When you see the ATV for the first time, make note of the condition of the plastic on the fenders. The overall outward appearance of the ATV will give you a pretty good clue as to how hard the previous owner treated the vehicle. If the fenders or other plastic parts are cracked and ruined you can bet that you’re going to have to replace them and replacement parts and accessories are expensive. You have to decide how much you are willing to invest in refurbishing the ATV if parts do need replacing. Check the condition of the seat for any rips or tears. Again, a ripped seat isn’t a big deal and is totally replaceable, but do you want to spend the extra money to do that?

The next part of the inspection will take some work. You will want to lift the front end of the ATV up to inspect the undercarriage. With the ATV lifted, closely inspect the frame for any damage. Make sure there are no cracks or dents in the frame or any of the connecting welds Note any areas that might have rust and check them for cracks too. Check the handlebars for any loose play and do the same to each wheel. Loose wheels could indicate worn wheel bearings or damaged ball joints. Oil, breaks and the air filter and air box should also be checked. Ask the owner if they have any records regarding oil changes and maintenance. Some owners might have an owner’s manual that they can pass on to you. Take the ATV for a test drive too if you can to see how it handles.

Lastly, if a title is required in your state ask the owner if they have the title and if it is clear. Most states require a bill of sale with the VIN (vehicle identification number) on it. Whether your state requires a bill of sale or not, it is always a good idea to have one to protect both you and the former owner incase a dispute crops up. Be aware that in most cases you are buying the ATV “as is”, which means the previous owner is not responsible for any problems you might find with the vehicle after you have purchased it and brought it home.

Thursday, January 13, 2011

ATVing for the Entire Family


Since their introduction to the public several decades ago, ATVs have become increasingly popular. They are very appealing to riders because of the amount of excitement one feels as they are riding. People are now discovering that the whole family can enjoy the excitement of the ATV. On the negative side, though, people are often injured while ATVing, and because of this, it is vitally important that adults do everything they can to ensure the safety of both themselves and their children.  
To drive an ATVsafely, one needs to be strong, skilled, and, most important, mature. This is why children who are younger than 16 years of age should never operate an ATV. Adults must not forget that it also takes strength and stamina to be a passenger. A rider who is sitting behind the driver must be able to hold on tight for a long period. Often, they must hold on while the ATV goes over very bumpy ground at a high speed. The rule of thumb is that any child who is younger than six years old should never be allowed to ride as a passenger on an ATV. 
It is probably not surprising to discover that head injuries are one of the causes of both death and serious injury on ATVs. These serious injuries usually occur when ATVers crash, fall, or overturn while moving. It should be remembered that children can also be injured if they are towed by an ATV during winter months while they are on a sled, tube, tire, or other device that is being pulled by an ATV. In Canada, statistics show that four children younger than 16 years of age die in recreational vehicle related accidents each year.
So, the question becomes: how can ATVs be used safely so that they are enjoyed by each and every member of the family who is old enough to do so? If your family happens to own an ATV, be sure that no one under the age of 16 is ever allowed to drive it. Again, it is tremendously important that you never allow any children younger than six years of age to ride as passengers. If you are a parent who owns and operates an ATV, consider following these rules to be an excellent opportunity to model the type of safe behavior you want your children to display.  
Before you head out on your ATV adventure, be sure to be careful when fueling the ATV. Burns are possible, and you want to avoid them. Be sure to use the proper lifting methods when loading ATVs on and off trailers. This will help you prevent strains and crush injuries. Make sure that you check the weather forecast before you go out. It is probably not a good idea to venture out if a major storm is brewing. Also, make sure that you check the condition of the trails. Depending on how mountainous the area in which you will be ATVing is, you may want to assess whether there is danger of an accident. In the winter, always be sure to avoid ATVing on ice if you are not 100% certain that the ice is very thick.  
You should also be able to identify the signs of hypothermia if you are ATVing in the wintertime, and know what to do if it does occur. Make sure that you always travel with the right equipment. You will want to have well-insulated protective clothing, such as goggles, waterproof suits and gloves, and rubber-bottomed boots. Of course, you need to make sure that everyone who will be riding is wearing a helmet approved for ATVing. Another thing you can do to ensure the safety of you and your family is to attach brightly colored antenna flags to your ATV. You will definitely want to do this if you are driving in a particularly hilly area.  
Of course, the most important thing you can do to ensure your family's safety is to drive carefully. Use wisdom and caution. If you have followed the preceding guidelines, you will find that ATVing is a very exciting sport that can be enjoyed by members of your entire family.

Wednesday, January 12, 2011

ATV Safety Training Course


ATV trail riding is a fun and exciting sport that can provide hours of entertainment for the whole family. There is nothing like a good day on the trails, out in the sun and wind, to bring the family together or to meet up with friends or to make new ones. But ATV trail riding isn’t all fun and games; there is a large degree of safety precautions involved. While you’re having fun you still have to remember that you are working with a motorized vehicle and, although it is designed for recreation, that vehicle needs to be treated with the same respect and caution that you would a car or a motorcycle. For this reason, before you hop on that brand new ATV and hit the trails, you might want to consider taking an ATV safety training course.

Unlike a car or motorcycle, no license is required to operate an ATV. Many people learn how to ride from older siblings, parents or friends. While learning from friends or family isn’t a bad idea overall, there might be some finer points to driving ATV’s that your family or friends might have left out.

While you might find some places that will offer an ATV safety training course not all courses have certified trainers. The ATV Safety Institute (ASI) was founded in 1988 with the intent to provide a course that would educate riders about the safe operation of their vehicles and the hopes that once the students completed the course that the numbers of accidents and injuries on the ATV trails would be reduced. The idea seems to have worked, since 1984 many of the accidents involving ATV riding have been greatly reduced. ASI is also a non-profit organization.

When you purchase your ATV most of the manufacturers such as Honda, Arctic Cat, Yamaha and others will offer you the opportunity to take the ATV safety course free of charge. If you don’t own an ATV and might be considering buying one for yourself or a family member, you may still take the course for a small fee. As with the Motorcycle Safety Foundation where the course provides the motorcycle, some ASI courses might include the use of ATV’s donated either by manufacturers, local motor sports shops or private donors. Check with your instructors first to find out if you need your own ATV or not.

An ASI course will take you through all the basics of operating and riding an ATV and only takes half a day to complete. Certified instructors will teach you step by step each required skill in a controlled environment. You will begin with the use of proper safety equipment and how to start and stop your vehicle properly. Later on you’ll move up to going up and down hills and over and around obstacles on a closed course. Each lesson builds on the previous one, becoming more of a challenge as the course goes on.

Children as young as 6 years old can take the course. There are special classes for the age group between 6 and 16 and parents are required to be present during the classes. All ASI instructors complete a broad training program and must meet all of ASI’s requirements before they are allowed to call themselves a certified instructor. ASI reports that they have more than 1000 active certified instructors in more than 12000 locations across the United States. For more information or to locate a course near you, visit the ASI website at http://www.atvsafety.org/

Monday, January 10, 2011

ATV Safety Issues


Since their introduction to the public four decades ago, All Terrain Vehicles (ATVs) have become increasingly popular. They are very appealing to riders because of the amount of danger one feels while riding. This danger, however, should not be taken lightly. ATVs carry with them a number of safety issues which every rider ought to be concerned about. Despite the ongoing effort of ATV companies to make these vehicles safer, accidents are still happening on an all-too-regular basis. 
ATVs originally came as both 3-wheelers and 4-wheelers. It did not take long, though, for the industry and the public to realize the risk of the 3-wheeler. With no true center of gravity, the 3-wheeler was an accident waiting to happen. It was widely assumed that once ATV companies permanently removed the 3-wheeler from the market, accidents would sharply decrease. While there has been a decrease in the number of deaths and injuries due to 4-wheel ATVs, enough have happened that the vehicle's safety is still a legitimate concern within the industry. For example, the U.S. Consumer Product Safety Commission (CPSC) revealed that in 2004 alone, there were an estimated 136,000 serious injuries in the United States that were directly related to ATVs. The preceding year, 2003, saw 740 people lose their lives due to ATV accidents.
The troubling aspect of this rather high number of deaths and injuries attributed to ATVs is that the industry and the CPSC recently agreed on a series of action plans designed to improve ATV safety. These action plans represent an agreement between the ATV industry and the CPSC to crack down on several issues that affect the safety level of ATVs. Some of the things that are now required of companies that sell ATVs are the labeling and safe marketing of ATVs. In addition, the CPSC has been given more say as to what ages may ride certain types of ATVs. The problem, however, is that a large number of companies that manufacture and distribute ATVs are based in Asia and Italy. Because of their international status, they are not required to abide by the laws of the CPSC. In other words, many of the companies that are making ATVs are exempt of any oversight by the U.S. government. 
Due to the CPSC's inability to control the safety guidelines concerning the ATV industry, focus has now shifted to state control over the age of riders. Many states have recently enacted legislation that specifically governs the usage of ATVs on state-run land. Some of the factors that states deal with are the ages of riders and the type of engines they use. Several states mandate that the use of machines greater than 90cc by riders under the age of 16 is strictly prohibited.  
Those who criticize these blanket policies concerning riders' ages claim that these rules do not adequately address the issue. For example, critics claim that many early teen males are bigger and sometimes stronger than fully-grown adult females. To protect themselves from this line of thinking, some states are simply prohibiting any minors (those under the age of 16) from driving ATVs. Advocates of ATVs, however, argue that training riders at an earlier age only stands to improve safety. They argue that children exposed to ATVs at an early age will gradually gain the expertise necessary to be safe drivers of ATVs when they reach adulthood.
In 1988, the All-terrain Vehicle Safety Institute (ASI) was formed. This organization seeks to address ATV safety issues by providing training and education for ATV riders. Most states now require that new users of ATVs undergo this type of training. This is one more in a series of attempts by the industry and the CPSC to improve the safety of ATVs. The need to do provide instruction in ATV riding and driving increases as the sport's popularity continues to grow.

Saturday, January 8, 2011

ATV for Beginners


Since their introduction to the public several decades ago, ATVs have become increasingly popular. They are very appealing to riders because of the amount of the excitement one feels as they are riding. People are now discovering that the whole family can enjoy the excitement of the ATV. On the negative side, though, more people are injured while riding ATVs than in any other recreational outdoor sport. If you are beginning to pursue an interest in ATVs, there are a number of things to know. 
The first step is to head for the trails with someone who has experience with an ATV. Actually ride an ATV so that you can decide if you are really interested in getting one. Once you are certain that you like it, go pick out your vehicle. As of this second, it's not a law but it is recommended that people of certain sizes use ATVs of certain sizes. For example, if you have a son and he weighs 85 pounds, do not try to find an 800 or 900 cc machine for you to stick him on. Try putting him on a 440 or 600 cc machine. This is more in line with something he can handle. Also, make sure that you are fitted to the right machine.  
It is usually not recommended that beginners buy brand new machines. As you end up becoming more familiar with the sport, you will talk with people who have different models, and you may end up finding yourself in constant pursuit of the "next best thing." After you have your first machine, definitely take a safety course. Courses are usually broken up into three or four weeks, with them lasting two and a half hours a night once a week. Consider these to be well worth your time and your money. Some courses even end with the instructor taking the class out on to trails. Courses are not mandatory - but they will most likely be one day! 
Next, you should take the time necessary to sit down at night and read your owner's manual. Keep in mind that each ATV is different, so if there are labels or parts you don't know, the only real answers you will ever find will be in the manuals. Oh yeah...when you go out on the trail, make sure that you carry the owner's manual with you. If you have bought a used machine from a neighbor or someone else, you can get a copy of the owner's manual by taking the serial number off the machine and going to a dealer.  
The next thing that you are going to want to do is to get out on to a trail and practice. That really is the only way that you are going to learn how to drive an ATV. Of course, you will always want to make sure that you have permission from whoever owns the land! In the beginning, be sure that you do what you must to ensure that you are riding sensibly. Ride with experienced people. As with other sports, you only get better by riding with people who are better than you. So ride with people who have a fair amount of experience. In addition, no matter how confident you are, when beginning, make sure that you always ride under the supervision of someone who can guide you. In other words, never, ever ride alone! 
If you follow these simple steps, you will be able to enjoy all of the fun and the excitement that makes up driving an ATV. As with other things, it will take some time before you, as a beginner, are able to do it by yourself. Take the time to receive training on how to do it, and dive headlong into the owner’s manual. Once you feel ready to hit the trails, practice driving your ATV. Remember to have an experienced driver with you. Following these steps will ensure your safety and will guarantee that you have a good time.

Friday, January 7, 2011

How to Conquer the Mud with Your ATV


Although certain kinds of ATVs are setup for pushing through deep mud, the technique for getting to the other side remains the same. When crossing obstacles like mud, the biggest risk is getting stuck, which means coming to a stop. Because of this, speed is your friend, although you can hit a mud hole too quickly. However, hitting the mud with speed will usually give you the momentum to slide over the mud hole and out the other side even if your tires won’t grip much.

In some cases, you may want to keep at least one tire on solid terrain, if possible, so that your quad has something it can grip. You can do this by straddling the ruts and staying on the high ground, or by leaving one tire out of the mud. However, if the mud hole is too deep, you may tip your ATV over into the mud.

Some say that you should stand on your pegs when entering a mud pit so that you are more ready to respond to the uneven terrain. However, keep in mind that you may meet a lot of resistance when you hit the mud, causing you to come to a near-stop very abruptly. If you are standing when this happens, you might go for a dive in the mud. Although standing up may work for some people, you need to be comfortable and balanced enough to be prepared to unseen rocks and roots in the mud, as well as the possibility of a nose dive, or suddenly catching traction with the throttle wide open.

One mistake that many new riders make is giving their ATV too much gas once they start to lose traction. Once the mud starts to fly, more gas is not always the solution, since flying mud means that your tires aren’t gripping anything solid. Sometimes a tire that is spinning a little slower will grab onto something that it would just grind against with more throttle. This is especially true if you come to a complete stop in the mud. When getting your quad moving again, easy does it, since too much gas means nothing but slinging mud. However, to get out of most spots after coming to a stop, some wheel spin is necessary, but more wheel speed usually doesn’t mean more traction. 


When you get into the mud, keep in mind that the tires with the most weight over them will be the most likely to get traction. So, if your quad is two wheel drive, you will want to keep some of your weight over the back axle, which will drive those rear tires through the slippery mud on the surface and down to something it can grab. Shifting your weight side to side can also help one of your tires get the traction it needs to pull you out of the mud.

Four wheel drive makes short work of a lot of mud that gives two wheel drive quads a lot of trouble, but four wheel drive is by no means an end-all solution for deep mud. Some mud pits may be entirely too deep for a stock setup, and a snorkel kit and exhaust extension may be needed just to ensure that your engine doesn’t suck in a bunch of mud and debris. For mud this extreme, four wheel drive is a necessity, and a set of aftermarket tires with a more aggressive pattern will also help pull you out of the mud.

No matter what kind of ATV you take through the mud, keep in mind that you may only have one shot at getting through without getting a tow. The more you know about the particular mud hole, the better, but an experienced rider can tell a lot about a mud pit by its looks and how soft the rest of the trail is. However, a hole you can get through one day may swallow your quad after a good rain or may change drastically after other people have ridden through. The key to conquering mud is keeping cool and having several ways to get your tires to grip instead of slip.

Wednesday, January 5, 2011

Headgear: Choosing the Right ATV Helmet


You have already taken the time to choose the right ATV for you or a family member. You did your research, maybe test drove a few to make sure the vehicle had the right “fit” and found one that matched both your budget and your personal sense of style. Your shopping isn’t over yet. Along with having the right ATV for either the trails or working out in the field, you’re going to need the proper safety gear to go along with it. Gloves, jackets, pants and boots are definitely on the list, but the most important piece of safety gear you will own will be your helmet.

How do you go about finding a helmet that fits properly? How tight is too tight? How loose is too loose? Are all helmets the same? Starting with the last question, not all helmets are the same. You want to get a helmet specifically designed for use on a vehicle like an ATV or a dirt bike. You don’t want to get a helmet that someone might use on a regular street motorcycle. Most ATV helmets cover your head completely and have a face guard that extends over the mouth. When you first put the helmet on it might feel tight because of all the padding inside. If you can slip the helmet over your head without it feeling snug, then you know that it’s too big. Try shaking your head side to side and going through as many movements as you can to see if the helmet shifts or slides when you move. Also try to decide how heavy the helmet feels. Does it feel cumbersome? Do you think you would be able to wear it for longer than 15 minutes without getting tired of it?

The second thing to look for is how easily the helmet comes off. If you’re in an accident or get thrown from your ATV, you don’t want your headgear to go flying off in one direction and you in another, which totally defeats the purpose of having a helmet. Now that you’ve got the helmet on, adjust the chinstrap and cinch it tight under your chin. Grab the helmet from the back and try to take it off by pushing it to the front. Does the helmet slip down over your eyes and come off? Now try moving the helmet side to side. If you can feel your skin shifting with the helmet and the foam padding then you know you have a good, solid fit.

Women have one more thing to consider when they go to look for a helmet. The way a woman wears her hair on the trail will make a big difference in what size helmet she gets. If she has short hair that won’t need to be braided or tied up, then there’s no problem. If every time she goes riding she French braids her hair or tucks it up under the helmet, then she might need to go with a larger size than she would if she didn’t put her hair up. The hair takes up extra space and if you don’t account for that your helmet won’t be the right size.

Children’s helmets are another issue. So many parents are very money minded when it comes to getting clothing and gear for their kids that they might be tempted to get a helmet a size larger for the child to “grow into”. Unfortunately you can’t cut corners when it comes to buying a helmet. It has to fit snuggly with no exceptions. As mentioned before, a helmet that is too large is as dangerous as having no helmet at all.

Monday, January 3, 2011

Choices to Make for Your First ATV 


For whatever reason, the ATV bug has bitten you. You’ve seen them on television or maybe you have a couple of friends that already go riding on the trails. Day in and day out, in all kinds of weather and in every season, people are enjoying recreational ATV trail riding. 
But when you’re new to this activity, where to begin? What needs consideration before making a major purchase of an ATV? Do you need to take a driver’s test or a safety course? Do you want the ATV for recreation or for work? Are you thinking about competitive racing? Finally, how much is this whole venture going to cost? 
The first thing you need to do is take a trip down to your local ATV dealership. Not only will you be able to look at and try out different models, but you can talk to the dealer for information as well. Don’t be intimidated about asking questions; salespeople are there to help - and also to make a sale. If you don’t like the service at one dealership, visit another.
A good idea is to try to rent a particular model before you buy. Renting an ATV for a weekend is a smart thing to do if you plan on having a child as a passenger on your ATV. So many times, a child will want to try a new hobby only to discover they don’t like it on the first day. There are some adults like that also, so if you’re unsure whether or not an ATV is for you, then do try renting one first for a test run before you sign the final papers to purchase. 
Currently, there are two types of ATVs on the market: Sport and utility. Some ATV models claim to be hybrids of the sport and the utility models. The utility ATV will have racks on the front and rear of the vehicle, while a sport model will have no racks. A hybrid model might have a rear rack only. The type of ATV best for a hunting, fishing, or camping trip would be a utility ATV. Those activities involve hauling a lot of stuff in and out of the bush, and you will need front and rear racks. Sport ATVs are for trail riding or racing and will usually have more speed available, as well as bright colors for high visibility on the trails. 
Engine type is also another consideration. Two stroke engines have a system where they lubricate themselves by burning fuel. There is a specific gas-to-oil ratio mix used in order for the vehicle to run properly. A few models require that the oil reservoir be refilled every five or six tanks of gas. Noise is also a major drawback, a by-product of higher RPMs.  Two-stroke engines are fading from popularity as technology improves, and more people lean towards the clean-burning four-stroke engine. Four stroke engines are quieter and are more fuel efficient than their two-stroke counterparts.
The automatic clutch is another feature that might cause some confusion. An automatic clutch requires putting the ATV into the appropriate gear when the engine hits the corresponding RPM for that gear. An automatic clutch does not mean an automatic transmission. Models with an automatic clutch will not have a foot peg for shifting; instead, there is a shifter for your left thumb on the handlebar. An ATV with automatic transmission has its drawbacks as well, as in order to have the machine engage the auto transmission, the driver must maintain a certain number of RPMs. This can be a problem when climbing steep, rocky terrain. 
Another question is whether you need two-wheel or four-wheel drive, otherwise known as “two by two” or “four by four”. A two-wheeled drive vehicle has the rear wheels do all the work and push the vehicle along, whereas a four-wheel drive employs all four wheels to provide better traction. Four-wheel drives do cost more, but are good for extra traction in particularly tough terrain. Newer machines on the market will allow for “on-the-fly” four-wheel drive, where the four-wheel drive is engaged as needed.
Finally, there is the choice of a drive shaft, chain, or belt drive. All three methods of drive are good ones, but an enclosed drive shaft seems to make better sense for various types of terrain. With a chain or a belt drive, there is always the risk of snapping the chain or the belt while out on the trails, and then you might have to do some emergency repairs. In the end, the shaft drive will pay for itself with lower maintenance.